Vulcan Corporation - EVA Co-Polymer Sheets

EVA Co-Polymer Foams

Vulcan Corporation produces a line of cross-linked, closed cell, EVA copolymer foams. These foams are available in a variety of colors and with density ranges between 5 to 21 lb/cu ft.

Vulcan EVA Foam - Mechanical Properties

Physical Properties Units Test
Method 2 lb 4 lb VS Foam 9115 VS Foam 9125 VS Foam 9135 VS Foam 9145 VS Foam 5555 VS Foam 5565
VS Foam 5575
VS Foam 5575 VS Foam 5575

Hardness Duro 'A' ASTM D
2240 ---- --- 15-25 20-30 30-40 40-50 50-60 60-70
70-80
34-45 45-55

Density lb/cu ft ASTM D
3575 1-3 3-5 5-7 8-10 11-13 13-15 14-17 16-19
19-23
5-7 8-10

25% Compression Deflection psi ASTM D
1056 3 5-10 10-15 20-30 30-40 50-60 -- --
--
40 50

Compression Set % of Original ASTM D
1056 15 10 10 10 10 10 7 7
7
25 20

Tensile Strength psi ASTM D
412 30 50 180 225 350 375 375 450
480
150 300

Ultimate Elongation percent ASTM D
412 150 150 250 300 300 350 175 200
150
50 50

Die C Tear lb/in ASTM D
624 10 15 25 35 50 60 60 75
90
40 50

Water Absorption lb/sq ft ASTM D
3575 <0.01 <0.01 <0.01 <0.01 <0.01 <0.01 <0.01 <0.01
<0.01
<0.01 <0.01

Resilience percent ASTM D 2632 40 40 45 35 25 25 15 15
10
20 15

Thermal Stability percent ASTM D
3575 2 2 2 2 2 2 2 2
2
2 2

Flame
Resistance
(FMVSS-302)
---
ASTM D
5132
PASS

PASS
PASS

PASS

PASS

PASS

PASS

PASS

PASS

---

---

Approx. Sheet Size inches --- 48x96 39x72 48x96 50x80 36x64 48x90 40x75 42x78 40x75 40x75 39x72
32x62
48x78
34x62 46x88
38x73

Back To The Rubber Division's Products Page

Physical Properties	Units	Test Method	2 lb	4 lb	VS Foam 9115	VS Foam 9125	VS Foam 9135	VS Foam 9145	VS Foam 5555	VS Foam 5565	VS Foam 5575	VS Foam 5575	VS Foam 5575
Hardness	Duro 'A'	ASTM D 2240	----	---	15-25	20-30	30-40	40-50	50-60	60-70	70-80	34-45	45-55
Density	lb/cu ft	ASTM D 3575	1-3	3-5	5-7	8-10	11-13	13-15	14-17	16-19	19-23	5-7	8-10
25% Compression Deflection	psi	ASTM D 1056	3	5-10	10-15	20-30	30-40	50-60	--	--	--	40	50
Compression Set	% of Original	ASTM D 1056	15	10	10	10	10	10	7	7	7	25	20
Tensile Strength	psi	ASTM D 412	30	50	180	225	350	375	375	450	480	150	300
Ultimate Elongation	percent	ASTM D 412	150	150	250	300	300	350	175	200	150	50	50
Die C Tear	lb/in	ASTM D 624	10	15	25	35	50	60	60	75	90	40	50
Water Absorption	lb/sq ft	ASTM D 3575	<0.01	<0.01	<0.01	<0.01	<0.01	<0.01	<0.01	<0.01	<0.01	<0.01	<0.01
Resilience	percent	ASTM D 2632	40	40	45	35	25	25	15	15	10	20	15
Thermal Stability	percent	ASTM D 3575	2	2	2	2	2	2	2	2	2	2	2
Flame Resistance (FMVSS-302)	---	ASTM D 5132	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	---	---
Approx. Sheet Size	inches	---	48x96	39x72 48x96	50x80 36x64	48x90 40x75	42x78	40x75	40x75	39x72	32x62	48x78 34x62	46x88 38x73